AVM58N-011AAR0GN-1213 is a multi-turn absolute encoder manufactured by Pepperl+Fuchs. Below is its detailed information:
- Operating Voltage: 4.5 - 30 V DC (for SSI, SSI + RS422); 10 - 30 V DC (for SSI + Push-Pull).
- No-Load Current: Maximum 180 mA.
- Power-On Stabilization Delay: < 250 ms.
- Linearity: 16-bit ± 2 LSB, 13-bit ± 1 LSB, 12-bit ± 0.5 LSB.
- Output Code: Gray code, Binary code.
- Counting Direction: Clockwise rotation, code value decreases (factory setting, adjustable).
- Interface Type: SSI; SSI + Incremental Track.
- Monostable Trigger Time: 20 ± 10 μs.
- Resolution: Up to 16 Bit (single-turn), 14 Bit (multi-turn); total resolution up to 30 Bit.
- Transmission Rate: 0.1 - 2 MBit/s.
- Voltage Drop: Ue - 2.5 V.
- Compliance Standard: RS 422.
- Housing: Aluminum, flat design.
- Flange: Aluminum 3.1645.
- Shaft: Stainless Steel 1.4305 / AISI 303.
- Length: 48.5 mm.
- Diameter: 87.1 mm.
- Weight: Approximately 460 g (aluminum housing assembly).
- Rotational Speed: Maximum 12000 min⁻¹ (12000 RPM).
- Moment of Inertia: 50 gcm².
- Starting Torque: < 5 Ncm.
- Shaft Load: Axial 40 N, Radial 110 N.
- Operating Temperature: -40 - 85 °C (-40 - 185 °F).
- Storage Temperature: -40 - 85 °C (-40 - 185 °F).
- Protection Class: DIN EN 60529, IP65 (without shaft seal); DIN EN 60529, IP66/IP67 (with shaft seal).
- Climatic Conditions: DIN EN 60068-2-3, no condensation.
- Radiated Interference: DIN EN 61000-6-4.
- Immunity to Interference: DIN EN 61000-6-2.
- Shock Resistance: DIN EN 60068-2-27, 100 g, 6 ms.
- Vibration Resistance: DIN EN 60068-2-6, 20 g, 10 - 2000 Hz.
- Detection Type: Photoelectric sampling.
- Device Type: Multi-turn absolute encoder.
- Mean Time to Failure (MTTFd): 150 years.
- Service Life: 20 years.
- Connector: 9416, 12-pin; 9416L, 12-pin.
- Cable: 7 mm, 6 x 2 x 0.14 mm², 1 m.
This encoder can be applied in industries such as geosciences & mining, energy, building materials, aerospace, automotive and auto parts. It is used to measure rotational speed, acceleration, position and direction. In the field of industrial automation, it can convert mechanical input into electrical signals for processing by counters, tachometers, programmable logic controllers (PLCs) and industrial computers.
