Based on the available information, the Berger Lahr VRDM 566/50 is a product likely related to industrial motion control, and the following is the detailed information in English:
- Manufacturer: Berger Lahr, which is now part of Schneider Electric.
- Product Type: It seems to be a permanent magnet stepper motor according to some sources, while other sources mention it as a servo drive module or a communication module. The specific type may vary depending on the model suffix (such as LNA, LNB, etc.).
- Step Angle: 1.8° (standard step).
- Maximum Static Torque: ≥3.5 N·m (with 24V input).
- Speed Range: 0 - 3000 rpm (under dynamic load).
- Resolution: 16384 lines per revolution (equipped with a high - precision encoder).
- Output Shaft Diameter: 50 mm (standard for the LNA series).
- Wiring Method: Dual A/B interface, which supports pulse/direction control.
- Operating Voltage: 24 - 50 VDC.
- Current Rating: 5A continuous, 10A peak.
- Microstepping: Up to 256 microsteps.
- Communication Interface: RS - 232/RS - 485.
- Environmental Adaptability: The working temperature range is - 20°C to +70°C, and the protection level is IP54 (dustproof and waterproof).
Some sources also mention that the VRDM 566/50 may be a MODBUS communication module with an operating voltage of 220V and an output frequency of 30kHz, which is compatible with MODBUS communication protocols and has a modular architecture for easy customization and expansion. However, this information may not be applicable to all models of VRDM 566/50.
