Based on the available information, here are some details about the Berger Lahr WPM 311.004-00 in English:
Basic Information
- Manufacturer: Berger Lahr
- Product Type: It is a stepper control or motion controller. Some sources also refer to it as a servo drive, but more accurately, it is a motion controller used for controlling stepper motors.
- Programming Environment: It uses a special programming environment unique to Berger Lahr. Depending on the firmware, it can be the Bpro3 programming system or the ProOed3 Programming system.
Technical Characteristics
Axis Configuration: It is a 4 - axis motion controller. It utilizes pulse/direction type outputs, which are commonly used to interface with stepping motor drives.
Performance: Some sources mention that it has a maximum torque capability of 50 Nm and a resolution of 0.001°, enabling precise control over speed and position. It also has a high - speed capability of up to 1000 rpm, which caters to applications requiring rapid acceleration and deceleration. However, these performance data may need to be further verified with the official manual.
Dimensions and Other Physical Attributes: There is no specific information about the dimensions of the WPM 311.004 - 00 in the current search results. But for the WPM311 series in general, some models have dimensions of 120 x 150 x 120 mm (WxHxD), and the weight is about 3 kg. It is possible that the WPM 311.004 - 00 has similar physical characteristics, but this is not confirmed.
The above information is compiled from various online sources. For the most accurate and comprehensive details, it is recommended to refer to the official user manual of the Berger Lahr WPM 311.004 - 00, which can be obtained from Schneider Electric's official website or other authorized channels.
