6ES7151-1AA03-0AB0 is a Profibus DP interface module for Siemens SIMATIC ET 200S distributed I/O system. The detailed information is as follows:
- Product Name: SIMATIC DP Interface Module IM151-1 Standard Type
- Product Status: Discontinued; the subsequent replacement model is 6ES7151-1AA06-0AB0
- Place of Origin: Germany
- Data Transmission: The maximum transmission rate is up to 12 Mbit/s, and the data volume for each input and output is 128 bytes.
- Module Connection: It can connect up to 63 power supply, electronic, or motor starter modules, with a maximum connection width of 2 meters.
- Bus Interface: Bus connection is realized via a 9-pin Sub-D interface, including a terminal module.
- Bus Protocol: PROFIBUS DP
- Interface: RS485
- Data Transmission Rate: Supports 9.6, 19.2, 45.45, 93.75, 187.5, 500 kbit/s, as well as 1.5, 3, 6, 12 Mbit/s
- Address Space: The maximum address space for inputs and outputs is 244 bytes
- Operable Modes: Can operate as a DPV0 or DPV1 slave
- Dimensions: Length 12.90 cm, Width 8.60 cm, Height 7.10 cm
- Weight: Approximately 0.19 kg
- Product Lifecycle: Classified as a discontinued product; the end-of-product lifecycle date is October 1, 2015.
- Price: There are significant price differences across platforms. For example, the listed price on the all4sps website is 125.77 Swiss Francs (excluding 7.7% value-added tax, plus shipping fees).
When using this module, it should be noted that it has been discontinued, so it may be difficult to obtain brand-new products in the market, and subsequent maintenance and upgrades may be subject to certain restrictions. Meanwhile, during system configuration and programming, operations must be performed in accordance with relevant Siemens technical manuals and programming specifications to ensure the stable operation of the system.
- SIMATIC ET 200S: Retains Siemens' official distributed I/O system name "SIMATIC ET 200S" (a classic product line for Siemens decentralized control, widely used in industrial on-site signal acquisition and control), ensuring consistency with the brand's technical documentation.
- DPV0/DPV1 Slave: Abbreviations for PROFIBUS DP slave device types. DPV0 (DP Basic Slave) supports basic data exchange functions, while DPV1 (DP Extended Slave) adds advanced functions such as alarm handling and cyclic data exchange; the terms are retained as-is to conform to PROFIBUS protocol standards.
- Sub-D Interface: A standard term for D-subminiature connectors, commonly used in industrial bus connections; "9-pin Sub-D interface" is the internationally recognized name for this interface form.
