The Siemens 6ES7410-5HX08-0AB0 is a central processing unit (CPU) module for the SIMATIC S7-400 and S7-400H/F/FH PLC systems, specifically designed for process automation applications within the SIMATIC PCS 7 environment.
- Product Type: SIMATIC S7-400 CPU 410-5H Process Automation
- Product Status: Likely in a spare parts supply phase, as it is an older model
- Key Function: Serves as the main processing unit for high-availability automation systems, capable of handling complex control tasks and supporting redundant operation
- Dimensions (L×W×H)：Approximately 219 mm × 50 mm × 290 mm
- Weight：Approximately 1100 g
- Operating Temperature：0°C to 70°C
- Protection Features：With conformal coating for enhanced protection in industrial environments (ISA-S71.04 severity level G1; G2; G3)
- Certifications：CE, UL, and other relevant industrial certifications
- Process Automation：Designed for use in SIMATIC PCS 7 process control systems, suitable for applications in industries such as chemical, pharmaceutical, and power generation, where high reliability and continuous operation are required.
- Redundancy Support：Can be used in a redundant configuration with another compatible CPU. The two CPUs in a redundant pair continuously synchronize their data, and in the event of a failure of the active CPU, the standby CPU takes over within a short time to ensure uninterrupted operation of the automation system.
- Configuration and Programming：Requires SIMATIC Manager and STEP 7 programming software for configuration and programming. It also supports Configuration in Run (CiR) functionality, which allows for certain configuration changes to be made while the system is running.
As an older model, while it is still available for spare parts supply, Siemens may recommend migrating to more modern CPU models from the SIMATIC S7-1500 series for new projects or when system upgrades are required. The S7-1500 series offers higher processing power, more advanced communication capabilities, and integration with the TIA Portal engineering framework, which provides a more unified and efficient engineering experience compared to the older SIMATIC Manager and STEP 7 software used with the S7-400 series.
